Wilwood Brake Shut-Off Valve - 12V Remote Control - 1/8 in NPT Female Ports Navigation Systems Optional temperature sensor input to

Optional temperature sensor input to control timing based on temperature

from start to finish and EVERY carburetor goes across the dyno and tuned before it ships

047 in Compression Thickness

Bearings / Center Cap / Hardware / Seals

Aeroquip AN flare adapters are made from attractive

Wilwood Brake Shut-Off Valve - 12V Remote Control - 1/8 in NPT Female Ports Navigation Systems Optional temperature sensor input toThis valve can be used as a brake shut off. When energized, the valve will block pressure from reaching downstream. The valve does not prevent fluid from returning to the master cylinder. This eliminates the possibility of trapping pressure when activating the valve. Requires a 12 Volt, 5 amp (recommended) fused power source through a toggle switch. Warning: Not a line lock assembly. Not for street use. Please read instruction sheet available at http: